Firmware
Xingzhi Cube 1.54" TFT
Firmware for Xingzhi Cube board with 1.54" TFT display.
Specifications
| Spec | Value |
|---|---|
| Chip | ESP32-S3 |
| Flash | 16MB |
| PSRAM | 8MB |
| Connectivity | WiFi 2.4GHz |
| Microphone | I2S MEMS |
| Speaker | I2S DAC |
| Display | TFT 1.54" 240Γ240 |
Features
- β WiFi connectivity
- β Voice Activity Detection (VAD)
- β Acoustic Echo Cancellation (AEC)
- β TFT display with status & emoji
- β Automatic OTA updates
- β Wake word support (WakeNet)
- β Opus audio codec
- β WebSocket streaming
- β Compact cube design
Flash Firmware
Requires Google Chrome or Microsoft Edge 89+.
Connection Guide
- Connect the board to your computer via USB-C cable
- Make sure you have the CP210x or CH340 driver installed
- Press the Boot button on the board when flashing (if needed)
After Flashing
- The board will restart automatically
- The TFT display will show a 6-digit activation code
- Connect to WiFi via BluFi or network configuration
- Register the device on the Dashboard